MAXPRO200 plasma system
The MAXPRO200® LongLife® plasma cutting system is engineered for heavy-duty, high capacity automated and handheld cutting and gouging applications. The easy-to-use system operates with either air, oxygen, or nitrogen plasma gas, and combines fast cutting speeds and quick process changes to maximize productivity. Advanced Hypertherm consumable designs – including LongLife® technology – improve cut consistency and significantly increase consumable life to lower your cost per part.
Specifications
| Input voltages | 200/208 VAC, 3-PH, 50 Hz, 108/104 A 220 VAC, 3-PH, 50 – 60 Hz, 98 A 240 VAC, 3-PH, 60 Hz, 90 A 380 VAC, 3-PH, 50 Hz, 57 A 400 VAC, CE, 3-PH, 50 – 60 Hz, 54 A 415 VAC, CE, 3-PH, 50 Hz, 52 A 440 VAC, 3-PH, 50 – 60 Hz, 49 A 480 VAC, 3-PH, 60 Hz, 45 A 600 VAC, 3-PH, 60 Hz, 36 A |
|---|---|
| Output voltage | 50 – 165 VDC |
| Maximum output current | 200 A |
| Duty cycle rating | 100% @ 33 kW, at 40° C (104° F) |
| Operating temperature | -10° C to 40° C (+14° F to +104° F) |
| Power factor | 0.98 @ 33 kW output |
| Maximum OCV | 360 VDC |
| Dimensions | 102 cm (40.14") H, 69 cm (27.12") W, 105 cm (41.23") L |
| Weight | 335 kg (740 lbs) |
| Gas supply Plasma gas Shield gas Supply gas pressure | Air, O2, N2 Air, N2 6.2 +/- 0.7 bar (90 +/- 10 psig) |
Operating data
- Virtually dross-free cutting capacity - mild steel 20 mm (3/4")
- Production pierce capacity - mild steel 32 mm (1 1/4")
- Severance* - mild steel 75 mm (3")
- Bevel - 200 amp consumables support 45° bevel capability
| Material | Current (amps) | Thickness (mm) | Approx. cutting speed (mm/min) | Thickness (inches) | Approx. cutting speed (ipm) |
|---|---|---|---|---|---|
| Mild steel Air plasma Air shield |
|
3 |
3760 |
0.135 |
110 |
| Air plasma Air shield | 130 | 6 12 | 3865 2045 | 1/4 1/2 | 150 75 |
| Air plasma Air shield | 200 | 6 12 20 25 32 50 | 4885 2794 1415 940 630 215 | 1/4 1/2 3/4 1 1 1/4 2 | 190 110 60 35 25 8 |
| O2 plasma Air shield | 50 | 1 3 | 6775 3650 | 20 ga 0.135 | 270 130 |
| O2 plasma Air shield | 130 | 6 12 | 3925 2200 | 1/4 1/2 | 150 80 |
| O2 plasma Air shield | 200 | 6 12 20 25 32 50 | 6210 3415 1920 1430 805 270 | 1/4 1/2 3/4 1 1 1/4 2 | 235 130 80 55 32 10 |
| Stainless steel N2 plasma N2 shield |
|
20 |
1140 |
3/4 |
50 |
| Air plasma Air shield | 200 | 12 20 | 3050 1520 | 1/2 3/4 | 120 60 |
| Aluminum N2 plasma N2 shield |
|
20 |
1630 |
3/4 |
70 |
| Air plasma Air shield | 200 | 12 20 | 3370 1625 | 1/2 3/4 | 125 70 |
*The thickness that can be severed at approximately 125 mm/min (5 ipm) with reduced cut quality. Cutting at severance thickness should be infrequent.